LinuxDevCenter.com
oreilly.comSafari Books Online.Conferences.

advertisement


Linux in a Nutshell

This directory of Linux commands is from Linux in a Nutshell, 5th Edition.

Click on any of the 687 commands below to get a description and list of available options. All links in the command summaries point to the online version of the book on Safari Bookshelf.

Buy it now, or read it online on Safari Bookshelf.



arp

arp [options]

TCP/IP command. Clear, add to, or dump the kernel's Address Resolution Protocol (ARP) cache (/proc/net/arp). ARP is used to translate protocol addresses to hardware interface addresses. Modifying your ARP cache can change which interfaces handle specific requests. ARP cache entries may be marked with the following flags: C (complete), M (permanent), and P (publish). While arp can create a proxy for a single system, subnet proxies are now handled by the arp kernel module, arp(7). See the "Linux 2.4 or later Advanced Routing HOWTO" for details.

Options

host option arguments may be given as either a hostname or an IP address. With the -D option, they may also be given as a hardware interface address (e.g., eth0, eth1).

-a [hosts] , --display [hosts]

Display entries for hosts or, if none are specified, all entries.

-d host [pub] , --delete host [pub]

Remove the specified host's entry. To delete a proxy entry, add the pub argument and specify the interface associated with the proxy using -i.

-D, --use-device

Use the hardware address associated with the specified interface. This may be used with -s when creating a proxy entry.

-f file, --file file

Read entries from file and add them.

-H type, --hw-type type, -t type

Search for type entries when examining the ARP cache. type is usually ether (Ethernet), which is the default, but may be ax25 (AX.25 packet radio), arcnet (ARCnet), pronet (PROnet), or netrom (NET/ROM).

-i interface, --device interface

Select an interface. If you are dumping the ARP cache, this option will cause the command to display only the entries using that interface. When setting entries, this will cause the interface to be associated with that entry. If you do not use this option when setting an entry, the kernel will guess.

-n, --numeric

Display host IP addresses instead of their domain names.

-s host hardware-address [netmask mask] [pub] , --set host hardware-address [pub]

Add a permanent entry for host at hardware-address. A hardware-address for type ether hardware is 6 hexadecimal bytes, colon-separated. The pub argument can be used to set the publish flag, creating a proxy entry.

-v, --verbose

Verbose mode.

Examples

Display entry for host eris:

arp -a eris

Set a permanent cache entry for host illuminati, whose hardware address you know:

arp -s illuminati 00:05:23:73:e6:cf

Set an ARP proxy for host fnord using the eth0 interface's hardware address:

arp -Ds fnord eth0 pub

Remove the fnord ARP proxy:

arp -i eth0 -d fnord pub


Linux Resources
  • Linux Online
  • The Linux FAQ
  • linux.java.net
  • Linux Kernel Archives
  • Kernel Traffic
  • DistroWatch.com


  • Sponsored by: