Author's note: In part one of this two-part series on CrossOver, a plug-in designed to bring native QuickTime functionality to the Linux platform, I described how the technology was enabled, its licensing, and how to get it.
In this article, I'll show you how CrossOver performs compared to the native Windows version of QuickTime, and I'll provide some background information about QuickTime so you can have the best multimedia experience possible with it on the Linux platform.
After extensive testing on a Linux box I can tell you this: CrossOver works. And it works well.
As you might expect from a first release of technology with this level of sophistication, however, there are a few quirks to contend with. I'm going to show you both the strengths and weaknesses of the plug-in, and show you how far you can push its capabilities. If you're not familiar with CrossOver and how it works, take a look at my first article that provides all of the background information you need.
When we first looked at the technology, we had some concerns about how it would perform under real-life conditions. After all, users have to install the Wine libraries that enable the Windows version of QuickTime, which is a demanding architecture even on native platforms.
I managed to commandeer an Acer Tower with a Pentium III processor running at 450 MHz. The Acer has 256 MB of RAM installed. The operating system is Red Hat 6.1, and the browser is version 4.76 of Netscape. If you're wondering why I chose a machine with these specs, it's because of my experience with multimedia on other platforms. Video playback requires a certain degree of horsepower, and I wouldn't consider less than 350 MHz on any platform for decent QuickTime performance.
Now, we're not only talking about QuickTime playback on Linux, but the possibility of QT authoring on this platform. What are your thoughts?
Part 1 of this series:
CrossOver Brings QuickTime Movies to Linux: Part 1 -- Until recently, QuickTime movie playback was limited to Windows PCs and Macs. But the CrossOver plug-in attempts to bring native QT functionality to the Linux platform. Here's an introduction to CrossOver and a look at what QuickTime can bring to open-source computing.
If you're running Linux on a 166-MHz Pentium I, you're not going to have a satisfying QuickTime experience. It's not CrossOver's fault in that case because you'd have a lousy experience on Macs and PCs too.
For comparison purposes, I used a ThinkPad with a 500-MHz Pentium III processor and containing 128 MB of RAM. The operating system is Windows 98, Rev.2, with IE 5.5 for the browser.
The CrossOver disc installs QuickTime version 5.0.2 -- state of the art in multimedia. So Linux users are running the best Apple has to offer in this arena.
I ran a number of download tests with the two machines, and they all went more or less like this:
As you can see, QuickTime movies on Linux performed virtually the same as they did on Windows under similar conditions. The 24-frame-per-second playback was smooth on both computers, and the video quality was very high. Impressive.
If you're not already familiar with QuickTime on the Web, you might not realize that this technology grabs content in two very different ways. I think it's important to understand the distinction between the two types because they each have advantages and disadvantages.
Until QuickTime 4, HTTP download was the only the only method for accessing QT video on the Web. Authors would compose their multimedia and place the
.mov files on an HTTP server. Users would click on the files via their browsers to initiate the download process. Once the files were safely captured in the browser's cache, they could be played in their entirety without interruption. They could also save files to disc for viewing later.
In order to let you begin to watch the movie before you finish the download, Apple engineers developed the "Fast Start" technology. You enable it by setting your plug-in preference to the bandwidth you have available. During HTTP download, the application uses that setting to determine how much of the movie it has to download before it can start playing it without interruption. This gives the feeling of "streaming" even though technically it isn't -- it's just starting fast.
Fast Start allows the convenience of streaming, but with the option to save the video to the hard drive -- a luxury not available with true streaming video.
When QuickTime 4 was released, we had the option to watch video via the plug-in or player via true RTSP streaming, similar to the technology that RealNetworks has used for years.
RTSP is true streaming that begins playback as soon as the link is negotiated. It requires a streaming server. And the content can't be saved to the hard drive. RTSP is also more vulnerable to network congestion and interruptions than HTTP serving.
RealNetworks has worked hard to improve its technology to prevent playback disruption, but Apple didn't introduce its "skip protection" until QuickTime 5, which is the version that CrossOver installs on your Linux machine.
In my opinion, the user experience is still better with HTTP serving that with RTSP. If you're new to QuickTime, I'd experiment first with the HTTP downloads on the Movie Trailers page. Once you get a feel for how your machine and bandwidth combination handles this type of rich content, then you can decide if you want to try streaming via QuickTime TV and other streaming sources. Most of the QuickTime content on the Web today is the HTTP variety.
The QuickTime player and browser plug-in are free on all platforms. But for those who want more advanced functionality and authoring tools, Apple offers QuickTime Pro for $29.99 USD.
What's interesting about this is that when you install standard QT, you have acquired all of the pro goodies too. The reason you pay Apple 30 bucks is for a pro key that "unlocks" all of those tools that you already have.
In my testing, I wanted to push the CrossOver plug-in as far as possible, so I purchased a pro key and upgraded my "Linux" version of QuickTime. The thought of being able to author QuickTime content on a Linux box was almost more excitement than I could bear.
Some of the basic goodies that you get with the pro version are:
Here's where the CodeWeavers developers still have a little more work to do. Your QT pro key, when applied to the CrossOver installation of QuickTime, only enables enhanced functions number one and two from my list above. Items three, four, and five are simply not present.
If you check some of the drop-down menus in the CrossOver installation of QuickTime with the pro key enabled, you'll see that certain items are duplicated, such as "copy" followed by another "copy." Well, neither copy works because the selection tools aren't enabled. Another function is supposed to be located where the second "copy" appears.
So the question is, is it worth spending $29.99 for the pro version when all you get is the save function and looping? For most folks probably not. But if you already have a QT 5 pro key for Windows, there's no harm in using it with CrossOver to enable the couple extra goodies.
I am truly impressed with the basic QuickTime functionality that CrossOver brings to the Linux platform. On a decent mid-level computer, the download and playback of multimedia content is virtually the same as it is on QuickTime's native platforms. Now Linux users can watch the latest online spoofs and newsclips without having to switch to a Macintosh or Windows PC.
I did trip over a couple of minor annoyances. The one that bugged me the most was that the movie title didn't display properly at the top of the player. But generally speaking, these annoyances were rare and didn't affect my enjoyment of watching movies.
I liked that all of the metadata associated with the files was displayed properly in the correct locations (except for the movie title, that is). This means that descriptions, copyright information, and credits were accessible to Linux users just like they were on other platforms. Plus all of the movie properties, such as frames per second, codec type, and data size, were also available.
My request for future improvements centers around enabling all of the authoring tools in the pro version. QuickTime is potentially a great multimedia tool for open-source artists. Because it handles not only
.mov files, but also nearly every other audio and video type -- including MPEG-4 very soon -- Linux users are able to work in the format of their choice with one tool. If that doesn't embody the open-source way of thinking, then what does?
If you are interested in playing rich media on your Linux box, I recommend that you buy CrossOver. Once you've paid your money and used the product, let them know that you want them to add the pro functionality that will make it a full-fledged citizen in the QuickTime community.
Derrick Story is the author of The Photoshop CS4 Companion for Photographers, The Digital Photography Companion, and Digital Photography Hacks, and coauthor of iPhoto: The Missing Manual, with David Pogue. You can follow him on Twitter or visit www.thedigitalstory.com.
Return to the Linux DevCenter.
Copyright © 2009 O'Reilly Media, Inc.