O'Reilly Book Excerpts: Windows XP Hacks
Hacking Windows XP
Editor's note: Recently, O'Reilly released another book in its new Hacks series: Windows XP Hacks. This book offers power users the kind of know-how to bend Windows XP to their will. And nothing tries the will of a power user more than a desktop slow to start up (or for that matter, shut down). In the first of two hacks we're publishing this week from Windows XP Hacks, author Preston Gralla walks through two steps to take for faster startup times, as well as ways to speed up the shutdown process. And in the second excerpt, Preston talks about some of his favorite ways to hack XP's interface using the Registry. Enjoy.
Hack #3: Speed Up Boot and Shutdown Times
Shorten the time it takes for your desktop to appear when you turn on your PC, and make XP shut down faster as well.
No matter how fast your PC boots, it's not fast enough. Here's a hack to help you get to your desktop more quickly after startup, and to let you walk away faster after shutdown.
The quickest way to speed up boot times is to use the free Microsoft utility BootVis.exe. Although it's intended primarily for developers, anyone can use it to analyze their boot times and see where there are slowdowns. More important, the tool will also automatically make system changes to speed up your boot time, so you don't need to go into a lengthy analysis of where your slowdowns are and how to solve them.
Depending on your system and how it's set up, you may see only a moderately faster startup time, or you may speed up boot time dramatically. I've seen reports of improvements ranging from a little over 3 seconds to more than 35 seconds. The improvements I found on my systems were moderate-7 seconds faster on one, and 10 seconds faster on another. Think of all the things you could accomplish with another 10 seconds in the day!
The BootVis utility traces boot time metrics and then displays the results in a variety of graphs showing total boot time, CPU usage, disk I/O, driver delays, and disk utilization. Download it from www.microsoft.com/whdc/hwdev/platform/performance/fastboot/default.mspx and extract it into its own folder. Go to the folder and double-click on BootVis.exe. To analyze how your system boots, choose Trace → Next Boot. (Choose Trace → Next Boot + Driver Delays if you want to trace delays caused by drivers as well as your normal boot sequences.) Tell the program how many times to reboot and run the test (the more times it runs, the more accurate the results, although the longer the test takes to run). Click OK, and your system will reboot. After you log on after the reboot, you'll see this message:
Please WAIT for Bootvis to launch!
Don't do anything yet; the program is working, even though it doesn't appear to be doing anything. After a while, you will see the screen shown in Figure 1-3. Soon after that the results appear, as shown in Figure 1-4.
Figure 1-3. BootVis alerts you that it is working
Figure 1-4. BootVis activity graphs display how much time each bootup activity takes
A series of graphs outline boot activity and loading time. The Boot Activity graph, shown in Figure 1-4, is the most important and details all aspects of the boot, including how much time each boot activity takes. Hover your mouse over an activity, such as Driver, and a balloon tip will appear, telling how much time that activity takes to load. To see the total boot time, hover your mouse over the rectangle at the top of a solid black line, and your total boot time will be displayed in a balloon tip, as shown in Figure 1-4.
The pictures and graphs are pretty, but the truth is, you don't really need them, because the utility will automatically make changes to speed up your boot time. To have the utility speed up your boot time, choose Trace → Optimize System and click Reboot Now when a prompt appears. Your system will shut down, reboot, give you the same initial prompt as when it's analyzing your system, but then alert you that it's reorganizing your boot files for faster startup. When the alert goes away, you can use your computer as you would normally. If you want to determine your increase in boot speed, run BootVis again and compare the new boot time to your previous boot time.
Enable Quicker Startups with a Boot Defragment
There's another way to speed up XP startup: make your system do a boot defragment, which will put all the boot files next to one another on your hard disk. When boot files are in close proximity to one another, your system will start faster.
On most systems, boot defragment should be enabled by default, but it may not be on yours, or it may have been changed inadvertently. To make sure that boot defragment is enabled on your system, run the Registry Editor [Hack #68 of Windows XP Hacks], and go to:
Enable string value to
Y if it is not already set to
the Registry and reboot. The next time you reboot, you'll do a boot
WARNING: I've found many web sites recommending a way of speeding up boot times that may in fact slow down the amount of time it takes to boot up, and will probably slow down application launching as well. The tip recommends going to your C:\WINDOWS\Prefetch directory and emptying it every week. Windows uses this directory as a way of speeding up launching applications. It analyzes the files you use during startup and the applications you launch, and creates an index to where those files and applications are located on your hard disk. By using this index, XP can launch files and applications faster. So, by emptying the directory, you are most likely slowing down launching applications. In my tests, I've also found that after emptying the directory, it takes my PC a few seconds longer to get to my desktop after bootup.
Speed Up Shutdown Times
It's not only startup times that you'd like to speed up; you can also make sure that your system shuts down faster. If shutting down XP takes what seems to be an inordinate amount of time, here are a couple of steps you can take to speed up the shutdown process:
Don't have XP clear your paging file at shutdown
For security reasons, you can have XP clear your paging file (pagefile.sys) of its contents whenever you shut down. Your paging file is used to store temporary files and data, but when your system shuts down, information stays in the file. Some people prefer to have the paging file cleared at shutdown, because sensitive information such as unencrypted passwords sometimes ends up in the file. However, clearing the paging file can slow shutdown times significantly, so if extreme security isn't a high priority, you might not want to clear it. To shut down XP without clearing your paging file, run the Registry Editor and go to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
Change the value of
0. Close the Registry and restart your computer. Whenever you turn off XP from now on, the paging file won't be cleared, and you should be able to shut down more quickly.
Turn off unnecessary services
Services take time to shut down, so the fewer you run, the faster you can shut down. For information on how to shut them down, see [Hack #4].
Pages: 1, 2